Warriors Elite Ops Riggers Belt is made from the highest
standard Mil Spec materials.The webbing used is 4088 type V11 and has a
breaking strain greater than 6000 lbs. The Metal Buckles are made from
heat treated hardware with a tensile strength of 2500 lbs and finished
in Dark Grey Phosphate. The Material is treated with a resin which makes
the belt stiff yet plyable, this is the perfect combination, it will
not dig in to your sides but is rigid enough to support a holster or
drop leg without the belt twisting.
SIZES
Small 29" to 32"
Medium 32" to 35"
Large 35" to 38"
XL 38" to 41"
Threads
Thread quality is fundamental to the construction, durability and strength of tactical equipment.
Two factors have a negative impact on the life Span of threads
1) Mildew is one of the most common factors in the deterioration of military kit, causing it to
rot and ultimately results in unacceptable failure.
2) Sunlight has a harmful effect on the performance of threads, and over time causes their
deterioration.
Warrior only uses the highest quality US Mil Spec nylon threads imported from the USA which are
threated against both UV and Mildew.
Infra-Red Properties
All our Clips, Fabrics, Plastic Hardware, Threads and MultiCam/Coyote Webbing are treated at source to deliver the lowest
I.R. Signature possible.
888-GEAR-ZONE
Cart